Polyurethane foam, Premium Foam -10°C, 750 ml (gun-grade foam, summer grade) or equivalent

PENOSIL All Purpose Gunfoam Winter 165 is a professional-grade gun-applied foam designed for winter conditions. It is ideally suited for most sealing and filling tasks required in construction.

Properties

Excellent thermal and sound insulation

Dense and uniform structure

Low post-expansion

Very good adhesion to various construction materials

High-quality results in various weather conditions

Application with a foam gun

Usage details

Areas of application:
> Installing and sealing doors and windows in cold weather.
> Insulating and installing pipes.
> Filling openings and voids; sealing joints.
> Thermal and sound insulation.

Adhesion:
> Wood
> Concrete
> Masonry
> Bricks
> Most metals
> Plasterboard
> EPS
> Roof tiles

Instructions for use:
Hold the foam canister upright and screw it onto the gun, holding the gun handle with one hand and turning the canister with the other. Ensure the gun is not pointed at other people while screwing it on. Do not screw the canister onto the gun while upside down, and do not screw the gun onto the canister. After attaching the canister, shake it vigorously at least 20 times and turn it to the application position.

The foam output can be adjusted using the gun’s trigger. Tips:
Pre-moistening the surface ensures faster foam curing and a better result.
In cold weather, the can must be warmed in a heated room or in warm water before work begins. The temperature of the warming water or air must not exceed +30°C.
Air temperature during application: -10°C to +30°C; best results at +20°C.
Can temperature during application: +5°C to +25°C; best results at +20°C.
Surfaces to be joined must be free of dust, loose particles, and oil.

Limitations:
Cured foam is sensitive to ultraviolet (UV) radiation and must be covered.
Do not use in areas subject to constant contact with water.
The insulation foam does not adhere to polyethylene (PE), PTFE (Teflon®), or silicone surfaces.