Bituminous mastic Fiber Mastic

For waterproofing works, filling large holes and gaps.

• For the repair and waterproofing of roof cracks, holes, damage, fissures, penetrations
• Bitumen for sticking materials (including ruberoid) together
• For waterproofing reinforcement elements (screw holes, etc.)
• For waterproofing building structures (foundations, plinths, basements, foundation piles).
• Thanks to the high content of synthetic rubber and fiber, a very permanent plastic and elastic waterproofing layer is formed, which is resistant to the movement of different surfaces
• Can be applied to slightly wet surfaces
• Apply with a brush or putty spatula.
• Consumption: 1.2 kg m2 /1mm, for a 1 mm layer.

Usage:
The surfaces must be strong, clean and dry (can be slightly damp) and, if necessary, primed with Bitum Primer. Metal surfaces must be cleaned of rust and roughened beforehand. Mix thoroughly before use. Apply the mastic with a 2-5 mm putty trowel or comb, filling cracks and damage. The glued parts are then pressed against each other. It is recommended to apply several thinner layers on the surface. Especially in hot weather. For a strong waterproofing layer, apply at least 2 layers in different directions. Complete drying of the layer in 3-4 days.
Use at temperature: + 5 + 35 °C.

SAFETY:
Flammable. Keep away from children. Harmful by inhalation. Irritating to eyes, skin and respiratory system. Harmful to aquatic organisms. May have long-term negative effects on the aquatic environment. Avoid contact with skin and eyes. Use gloves and protective clothing. In case of fire, use powder extinguisher, foam extinguisher or sand. In case of contact with eyes or mouth, consult a doctor.