LEAK DETECTOR 400ML
Identifies leaks in compressed air and gas systems
- Worry-free, time-saving detection of pressurized and leaky points
- Non-flammable, therefore can be used on systems, containers and pipes containing flammable gases
- Operating temperature: +5 °C to +50 °C
- Freezes at 0°C
Note
Cold-resistant, can be used again after thawing. When used with oxygen-containing systems, make sure that they are under constant pressure during testing. If not, the low pressure can cause the leak detector fluid to enter the system and react with oxygen. Rinse off any remaining fluid immediately after testing. Spray only on suspected areas; the formation of foam indicates a leak
The instructions for use are recommended based on conducted tests and our experience; conduct your own tests before each use. Due to the large number of applications and the storage and processing conditions, we do not assume any liability for the results of a specific application. Insofar as our free customer service provides technical information or acts as an advisory service, this service assumes no liability, unless the advice or information provided falls within the scope of our defined, contractually agreed service or the advisor acted intentionally. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop the product.

